Receive A Free Gift On Orders Over $75

Want a piece made just for them? Start a custom design
Molten metal pouring from a glowing crucible into a casting flask while a torch keeps it hot at the casting bench

Cherish Customs

Custom Cremation Jewelry Made for Your Memory

One of a kind urn rings, pendants, bracelets, and earrings in sterling silver, gold, palladium, or platinum, designed with you and made by Rob Hunt, a master jeweler with more than 40 years at the bench.

Because this is more than jewelry. It is a promise to always remember.

Start My Custom Design

  • Over 19,000 Orders Since 2018

  • One of a Kind Designs

  • 40+ Years at the Bench

  • Ashes Handled With Care

Designed Around Your Story

Sometimes the right piece does not exist yet. Cherish Customs is custom memorial jewelry made only for the person you are honoring: custom cremation rings, pendants, bracelets, and earrings that hold a portion of their ashes.

Bring us a fingerprint, a line of their handwriting, a birthstone, a favorite symbol, or simply an idea. Rob Hunt, our master jeweler, has spent more than 40 years turning ideas like yours into pieces in precious metal, and he will make yours with his own hands.

How It Works

  • 1. Share Your Idea

    Tell us about the person and the piece you have in mind using the short form below. Photos and half formed ideas are welcome. Asking is free.

  • 2. Design It Together

    We reply within one business day. When you are ready, book a one hour Zoom design session with Rob for $200, credited toward your finished piece.

  • 3. Approve Your Design

    You see renders and a clear quote before anything is made. A 50 percent deposit starts the work, and we send simple instructions for mailing a small portion of ashes to the studio.

  • 4. Crafted and Delivered

    Your piece is cast, finished, filled, and sealed, usually two to six weeks after approval. The balance is due when it is finished, and it ships insured to your door.

Asking is free, and there is no obligation. We reply within one business day.

Start My Custom Design

Pieces Rob Has Made

Every piece below was designed and made by Rob Hunt at his bench in Logan, Utah. Rob has spent more than 40 years in jewelry manufacturing and at the bench. He casts gold, platinum, palladium, and silver for jewelry stores across the country, cuts many of his own stones, and checks every piece under a microscope before it leaves his shop. Your piece joins this list.

Custom ring with a large dark orange fire agate held by sculpted prongs and three small pink stones along the side, held between fingers
Custom silver dragon pendant wrapped around an orange stone on a snake chain
Custom ring with a dark faceted stone held up at the jeweler bench
Custom ring with a clear elongated stone shown on a fingertip at the bench
Finished custom ring with a blue stone in a black gift box held above the workbench
Custom yellow gold ring with a triangular blue stone shown on a fingertip
Custom ring with a round red stone and two smaller clear stones held between fingers
Custom ring with a dark green faceted stone in a prong setting worn on a finger
Custom rose gold ring with a blue trillion stone surrounded by small clear stones, held between fingers
Custom yellow gold ring with a bezel set clear stone and a laurel leaf detail
Side view of a custom yellow gold ring with a bezel set clear stone
Custom ring with a round red stone and floral shoulders held between fingers
Custom rose gold ring with a blue stone and a halo of small clear stones, side view
Custom pendant with a rectangular red stone and a row of small clear stones on an omega chain
Custom ring with a light blue oval stone in a leaf shaped setting, held between fingers
Custom rose gold ring with a carved inlay and a row of clear stones on a stone background

What We Can Create

  • Custom Urn Rings

    A ring designed from scratch, with a sealed chamber for a portion of ashes. A quiet way to keep them close every day.

  • Custom Pendants

    A pendant shaped around a symbol, a place, or a memory that belongs only to your family.

  • Custom Bracelets and Earrings

    A bracelet with a sealed chamber, or earrings that carry a stone they loved. If you can picture it, ask.

  • Your Metal, Your Details

    Sterling silver, gold, palladium, or platinum. Fingerprints, handwriting, names, dates, and birthstones can be worked into your design.

The Jeweler Behind Every Piece

  • More Than 40 Years at the Bench

    Rob Hunt has spent more than four decades in jewelry manufacturing and benchwork. Casting, wax carving, stone setting, laser welding, and finishing all happen at his bench, not in a factory.

  • Trusted by Jewelry Stores Nationwide

    Jewelry stores and bench jewelers across the country send Rob their casting and repair work and put their own names on what comes back. Your piece gets the same standard.

  • Checked Under the Microscope

    Rob alloys his own metal, guarantees his castings against porosity in writing, and inspects every finished piece under a microscope before it ships. A memorial piece deserves nothing less.

From Idea to Finished Piece

Your design is drawn in CAD, printed and cast in the same shop, poured from metal Rob alloys himself, and finished under the microscope. This is what that looks like.

Color coded CAD design view of a custom patterned ring on a computer screen
Carved wax ring model balanced on a fingertip before casting
Wax ring models attached to a casting tree on the bench
Printed resin ring models in a beaker of cleaning solution under yellow light
Freshly cast silver tree of rings held in a hand before cutting
Freshly cast yellow gold tree of rings held in a hand
Freshly cast yellow gold ring tree resting in an open palm at the bench
Molten metal pouring from a glowing crucible into a casting flask while a torch keeps it hot at the casting bench
Glowing crucible resting on the casting table after a pour
Casting flasks inside a kiln glowing red during burnout
Orange glowing cast button cooling on top of a flask
Small gold nuggets resting on a steel bench block
Gold casting grain weighed in a dish on a digital scale
Jeweler bench with a stereo microscope, torch, and tools
Jeweler bench with a stereo microscope, torch, and tools

Why We Started Cherish Customs

Made for the Memory You Cannot Replace

Since 2018, Cherished Emblems has helped families keep their loved ones close with cremation jewelry. Over the years, many of them told us the same thing:

“I just can’t find the right one.”

Cherish Customs is our answer. Every piece is made by Rob Hunt, a master jeweler and caster in Logan, Utah, with more than 40 years at the bench. He casts gold, platinum, palladium, and silver for jewelers across the country and designs one of a kind pieces himself. Instead of choosing from what exists, you create something made specifically for your memory, your family, and your story.

Create My Custom Design

More From Rob's Bench

Custom yellow gold ring with a carved inlay, a line of red stones and a line of clear stones
Custom yellow gold ring with a carved inlay and small pink stones
Custom oval belt buckle with a sculpted elk and two inlays, set in a textured frame
Custom yellow gold ring with a carved inlay and a row of small purple stones
Custom yellow gold ring with a carved inlay flanked by red and clear stones
Custom yellow gold ring with a carved inlay, a line of turquoise and a line of red stones
Custom silver ring with a carved inlay and a small purple stone resting on weathered wood
Custom silver ring with a carved inlay resting on weathered green painted metal
Custom silver ring with an engraved band and inlay resting on a pale textured surface
Custom ring with a blue and gold two tone finish and a sculpted inlay on a black background
Custom yellow gold ring with a carved inlay and small blue stones on a black background
Close view of a custom yellow gold ring with a carved inlay and a red detail

Stones Cut in the Same Shop

Polished Arizona fire agate cabochon with gold and green flash held on a fingertip
Polished fire agate cabochon with bubbled gold and green flash held on a fingertip
Elongated polished fire agate cabochon with green and gold flash on a fingertip
Round polished fire agate cabochon with orange and green flash held between fingers
Oval polished fire agate cabochon with gold and green pattern on a white cloth
Pale opal cabochon with green and orange flash resting on weathered wood
White opal cabochon with multicolor flash resting on dark weathered wood
Pale opal with rainbow flash resting on a rusted steel cable

For Funeral Homes and Pet Aftercare Providers

When a Family You Serve Wants Something Made Just for Them

Funeral directors and pet aftercare providers hear it too: the family has looked everywhere and nothing feels right. Cherish Customs gives you an answer. Send the family to us, or bring their idea to us yourself, and Rob designs and makes a one of a kind piece in precious metal while you stay their trusted guide. Your staff never handles the ashes, and the family approves the design and price before anything is made.

We also supply our ready made cremation jewelry at wholesale pricing to funeral homes, crematories, and veterinary clinics.

Partner With Us Send a Family's Request

Custom Pieces Start at $249 in Sterling Silver

Pieces in gold, palladium, or platinum are quoted by design. Your final price depends on the size of the piece, the metal, any stones, and the level of detail. The $200 design session is credited toward your piece, you approve your quote before anything is made, and there is no cost or obligation to ask.

Custom Jewelry Questions

Who makes the piece?

Rob Hunt, a master jeweler in Logan, Utah, with more than 40 years in jewelry manufacturing and at the bench. He casts precious metal for jewelry stores across the country and makes every Cherish Customs piece himself, from the design session to the final polish.

How much does custom cremation jewelry cost?

Custom pieces start at $249 in sterling silver. Gold, palladium, and platinum pieces are quoted by design. Your quote depends on size, metal, stones, and detail, and you approve the price before anything is made.

What is the design session?

A one hour video call with our master jeweler to shape your idea into a design. It costs $200, which is credited toward your finished piece if you go ahead. The session fee is not refundable, because the design time is real work, but asking questions before you book is always free.

How do payments work?

Half of the quoted price starts the work once you approve your design, and the other half is due when the piece is finished, before it ships. Custom pieces are made only for you, so they are final sale.

How long does a custom piece take?

Most custom pieces are finished and shipped two to six weeks after you approve your design, depending on the design and the season. If you need it by a certain date, tell us in your request and we will let you know honestly whether we can make it.

How do I send the ashes?

Only a small portion is needed. Once your design is approved, we send step by step instructions for packaging the portion and mailing it insured, straight to our jeweler's studio. Every portion is handled with the same care we would want for our own family, and anything not used is returned with your piece.

Can you include a fingerprint or handwriting?

Yes. Send a clear photo or scan of the fingerprint or handwriting with your request, and we will tell you how it can be worked into your design.

Will I see the design before it is made?

Always. Your design session produces renders of your piece, and you approve the design and the quote before any work begins.

Can I talk to someone first?

Of course. Send the form below, choose a phone call as the best way to reach you, and we will call you. Many families prefer to talk it through, and we are happy to help.